PLEASE CONTACT US FOR ALL OF YOUR ABRASIVE BLAST CLEANING EQUIPMENT AND PARTS NEEDS
METAL PREP
800 682 4187
"NEW' CLEMCO INDUSTRIES STOCK #00916 BLAST MACHINE PACKAGE DESCRIBED AS FOLLOWS
6 cu. ft. Blast Machine Package (Model 2452)
The pressure blast equipment is specifically designed for use with all medias, and incorporates all features necessary for efficient performance. This equipment is designed and built by Clemco Industries, who hold records, certificates, and approvals on the pressure vessels. This equipment is designed and equipped as follows:
1) PRESSURE VESSEL: The media is fed into the compressed air stream from a SIX cubic foot capacity pressure vessel. This pressure vessel is cylindrical in shape. It conforms with all appropriate ASME regulations and carries a National Board approval certificate, with a rating of 150 psig. The vessel has a conical bottom. The top of the vessel is concave to allow automatic feeding of the media through the remote controlled closure that is located in the center of the concave head. This closure utilizes a rubber-to-rubber seal (commonly known as the “pop-up-valve and seat). The vessel utilizes 1-1/4” piping to insure peak performance. A 6” x 8” hand hole is provided for maintenance access.
2) MEDIA FLOW VALVE: The control of the media feed is through gravity only when the pressure in the vessel is equal to the pressure in the compressed air piping. The valve is mounted at 45 degrees to the compressed piping and includes a clean out access plate above the flow control area. Tough stainless steel plates meter precisely. It is ruggedly built to blast for years. The Grit Valve is Clemco’s Flat Sand Valve and is of Clemco’s own design and manufacture.
3) MOISTURE SEPARATOR: (1) 1-1/2” moisture separator/filter with manual drain is provided. This unit will remove water and oil droplets. It will not remove vapors. It is not to be mistakenly used as an air dryer.
4) OPERATOR REMOTE CONTROLS: The remote controls are of the pneumatic type, which incorporate a normally closed inlet valve and normally open outlet valve. Air pressure opens the inlet valve and closes the outlet valve to begin the blasting process. If there is a loss of air pressure to the valves, springs return the valves to normal position and blasting stops. All interconnecting hoses between valves are included.
5) BLAST HOSE: The blast hose, which conveys the compressed air and media to the blast nozzle, has an inside diameter of 1-1/4” and an outside diameter of 1-7/8” x 50’-0” length. This hose is gum rubber lined and wrapped with a dual layer of tough nylon. The hose is rated at a working pressure of 150 psig. The hose lining is thick, carbon black impregnated rubber for static dissipation. It is fitted with lightweight, nylon quick couplings that mount externally, and incorporate automatically interlocking safety wires.
6) BLAST NOZZLE: One 3/8” ID Tungsten carbide nozzle will be provided with the blast machine. Nozzles are manufactured of the highest quality materials, and designed for long life. Connection of the nozzle to the blast hose is accomplished with an externally mounted nozzle holder made of nylon. Other nozzle sizes are available depending on your air availability.
7) OPERATOR PROTECTIVE EQUIPMENT: The operator of the blast equipment is provided with and environmentally controlled respiratory helmet, that is suitable for working in a dusty atmosphere. This operator protective equipment is designed by Clemco Industries, who is the holder of record of CE approval certificates from The National Institute of Occupational Safety and Health.
HELMET: Apollo 600HP DLX The operator’s helmet is of high-density polyethylene, double-walled construction, in conformance with and the approval of NIOSH. The helmet is fitted with a cape that extends a full 36” below the helmet bottom, and it has a removable inner collar. The air inlet is at the center?rear of the helmet. The view window is large and includes a fixed inner lens of impact resistant clear cellulose acetate that is .040” thick. Twenty five (25) PETG co-polyester outer lenses are included.
BREATHING AIR FILTER: This in-line filter is of die-cast aluminum construction, and is capable of filtering moisture and particles from the supplied air stream. It incorporates a pressure regulator and a pressure relief valve, and it is designed for floor or wall mounting. The filter material is three stage and includes activated charcoal, activated alumina, and fiber loft polyester material. THE FILTER DOES NOT REMOVE CARBON MONOXIDE (CO)
COOL AIR TUBE: The cool air tube is rated at 20 CFM and is of the vortex type. The adjustment control for cool air to the helmet is located on the cool air tube unit, within easy reach of the operator. This unit carries NIOSH approvals as part of the full system and with the same approval numbers.
RESPIRATOR HOSE: 50 FEET of respirator hose (coupled) is provided.
LEATHER GLOVE: (1) pair of leather gloves are provided.
QUANTITY: One (1) set of operator protective equipment is provided.
8) EXTRA ITEMS FOR PACKAGE THAT ARE PROVIDED:
(1) Blast Hose Safety Cable
(1) Blast Machine Screen
(1) Poly All-Weather Cover
(10) Coupling Gaskets
(10) Nozzle Washers
(6) Abrasive Trap Screens
SHIPPING WEIGHT IS 585 POUNDS
BUYER RESPONSIBLE FOR SHIPPING CHARGES!!!!!!!!!!! CONTACT US FOR SHIPPING QUOTES. (336)841-8047